Back to Home


QSC DSP Integration

Learn more about our device integration with QSC DSPs


Attero Tech AES67 and Dante-enabled products are designed for compatibility with QSC Q-SYS Core DSP solutions. In addition to AES67 and Dante network audio compatibility, Attero Tech has developed control plugins for Q-SYS Designer DSP software.


Configure, control and monitor these Attero Tech devices inside of Q-SYS Designer without ever needing additional software. 

All Attero Tech device plugins are available through Q-SYS Designer's Asset Manager. The Asset Manager can be accessed directly through the Q-SYS Designer software.  You can find out more about the latest version of Designer and download the software here

Important Note: License activation is required to deploy a design with plugins, scripting elements, or user control interfaces onto a Q-SYS Core processor. Please contact your QSC sales representative to purchase QSC Feature Licenses and learn how to deploy new feature licenses here.

The following is a list of integrated products that include plug-in support for QSC Core-based DSP systems: 

ProductDescriptionNetworked Audio Support
unAX2IO+4x2 Mic/Line Wall Plate (2 Mic)Attero Tech AES67
unAX4I4x2 Mic/Line Wall Plate (4 Mic)Attero Tech AES67
unA6IO4x2 Multi-I/O Wall PlateAttero Tech AES67
unA6IO-BT4x2 Multi-I/O Wall Plate w/ BluetoothAttero Tech AES67
unAIO2X2+2x2 Mic/Line I/O InterfaceAttero Tech AES67
Synapse D32i32 Mic / Line Input Networked Audio InterfaceDante™/ AES67
Synapse D32o32 Line Output Networked Audio InterfaceDante™/ AES67
Synapse D16Mio
16 x 16 Mic / Line Networked Audio InterfaceDante™/ AES67
unD3IO2x2 Multi-I/O Wall PlateDante™
unD6IO-BT4x2 Multi-I/O Wall Plate w/BluetoothDante™
unD6IO4x2 Multi-I/O Wall PlateDante™
unDIO2x2+2x2 Mic/Line I/O InterfaceDante™
unDX2IO+4x2 Mic/Line Wall Plate (2 Mic)Dante™
unDX4I4x2 Mic/Line Wall Plate (4 Mic)Dante™
unD4I-L4 Mic/Line Input Flange Mount w/ Logic I/ODante™
unHX2DDante™/ AES67 Enabled HDMI Audio De-Embedder/EmbedderDante™/ AES67
Zip4IP Paging StationDante™/ AES67


Products can be ordered with different control interface options to support an integrated system's control requirements. To specify a specific control interface, note the required product suffix as follows:

SuffixInterfaceCompatible Devices/Systems
3rd Party UDPQSC Q-SYS, Crestron, AMX, any UDP capable device
900-xxxxx-yy-BBiampDante™ enabled Tesira audio DSPs
900-xxxxx-yy-CSymetrixSymetrix Radius DSP

During use, the type of control interface for an active device can be identified with unIFY Control Panel application. The command interface type is shown in the selected device's popup context menu by right clicking on the device name in the list of available device.

If for any reason the command interface of a device needs to be changed to allow for control integration in the intended system, it can be re-programmed using the Smart Firmware Update utility found within unIFY Control Panel v2.3.0 and newer.  

Simply select the desired SFU update file, then the application will show the matching products in the system.  Then simply select -U or -C and press Apply to alter the control interface type.

Firmware Update Information

All firmware downloads are available by signing into the Attero Tech login site, and navigating to the "Software and Firmware / Device Firmware" folder. Click here to Login.