Resources

Back to Home

Categories


Symetrix DSP Integration

Symetrix DSP Integration Overview

Symetrix and Attero Tech have a long-standing relationship within the commercial A/V industry, together introducing native integration into Symetrix's Composer software and firmware for a wide variety of Attero Tech devices. These networked wall plate and interface products integrate with the Symetrix Radius, Edge and Prism DSPs, allowing for control and configuration directly within Symetrix Composer software.

Screenshot3.png?Revision=GM5&Timestamp=d25mj8


With the release of version 5.6 of Symertrix Composer, 7 Attero Tech products are now supported with control plugins within the Symetrix DSP architecture.  A list of the supported Attero Tech products can be found below.  Symetrix DSPs natively control the following Attero Tech product functions:

  • Preamp gain
  • Phantom power
  • I/O configuration
  • Dante™ Transmit & Receive Flows configuration

This native device configuration and oversight brings the capability of Attero Tech's own unIFY Control Panel software directly into Composer. 

For more detailed information on how to integrate and control Attero Tech products within Dante™-enabled Symetrix audio DSP systems, you can download a step-by-step instructions guide by Symetrix here.

The following is a list of integrated products for Symetrix Radius and Prism DSP systems:

ProductDescriptionRequired Firmware Control Option
unD3IO2x2 Multi-I/O Wall Plate-C
unDIO2x2+2x2 Mic/Line I/O Interface-C
unDX2IO+4x2 Mic/Line Wall Plate (2 Mic)-C
unDX4I4x2 Mic/Line Wall Plate (4 Mic)-C
unD4I-L4 Mic/Line Input Flange Mount w/ Logic I/O-C*
unDAES-O4 Ch. AES3 Digital Out Flange Mount-C*
unDUSB2x2 Plug-and-Play USB Connectivity-C
unD6IO4x2 Multi I/O Wall Plate-C
unD6IO-BT4x2 Multi I/O Wall Plate w/ Bluetooth Audio-C

*These devices are supported by only one type of firmware and are natively supported within Symetrix Composer

FIRMWARE COMPATIBILITY NOTE

Products can be ordered with different control interface options to support an integrated system's control requirements. To specify a specific control interface, note the required product suffix as follows:

SuffixInterfaceCompatible Devices/Systems
900-xxxxx-yy-CDante™ ProprietarySymetrix Radius DSP
900-xxxxx-yy-UQSC / 3rd Party UDPQSC Q-SYS, Crestron, AMX, any UDP capable device
900-xxxxx-yy-BBiampDante™ enabled Tesira audio DSPs


During use, the type of control interface for an active device can be identified with unIFY Control Panel application. The command interface type is shown in the selected device's popup context menu by right clicking on the device name in the list of available device.

If for any reason the command interface of a device needs to be changed to allow for control integration in the intended system, it can be re-programmed using the Smart Firmware Update utility found within unIFY Control Panel v2.3.0 and newer.  

Simply select the desired SFU update file, then the application will show the matching products in the system.  Then simply select -U or -C and press Apply to alter the control interface type.


Firmware Update Information

All firmware downloads are available by signing into the Attero Tech login site and navigating to the "Software and Firmware / Device Firmware" folder. Click here to Login.